By
Stephen Roshy
Submitted On August 08, 2014
Car door dings and dents are a common experience that car owners
have to face, especially during the summer months. During summers,
families take road trips, travel to amusement parks and other vacation
spots which bring a huge influx of vehicles at these destinations.
Consequently, there is a likely increase in dings and dents in the
vehicles.
A body shop repair for minor car door dings may only be too costly. A good way to save some bucks and be financially at ease is to use the dry ice dent removal method at home. Here's what you've got to do to remove a ding from your car using dry ice:
1. Inspect the Dent
The first thing you need to do is to figure out the intensity and size of the dent. Lighter dents spread on large areas give the best results, while deep impressions within a small area are a bit tricky to repair in the first go. Depending on the size and depth of the ding or dent, you will need to repeat the dry ice dent removal process until you are left with only traces of it.
2. Collect the Tools
This process is quite easy and all you need for this are some household tools. They include dry ice, protective gloves (to prevent any hazards related that the cold from the ice may cause), aluminum sheet and a hair dryer to warm the paint. These items are easily available at any store or mart, so you don't have to go through a hassle to buy them.
3. Soften the Panel
Blow the damaged area with a hair dryer for a couple of minutes or until the paint gets warm. Make sure the dryer is not too close to the surface of the car panel in order to prevent it from getting overheated or damaged further.
4. Cool it down
Now wear the thick protective rubber gloves and apply dry ice on the affected area, with the main focus on the center of the indentation. As you apply and move the dry ice rapidly on the damaged surface, the sudden drop in temperature from hot to cold will force the dent to come out and the panel will be leveled.
This process is one method of Paintless Dent Removal or PDR which is gaining immense popularity over the regular body shop repairs because it is eco-friendly, chemical free and cost effective. The dent removal method is perfect for minor dings in a vehicle as it is easy to do yourself without spending a fortune. However, it is important to note that this process needs to be repeated several times in order to ensure that the dent or ding completely disappears and you have a spotless car to drive.
A body shop repair for minor car door dings may only be too costly. A good way to save some bucks and be financially at ease is to use the dry ice dent removal method at home. Here's what you've got to do to remove a ding from your car using dry ice:
1. Inspect the Dent
The first thing you need to do is to figure out the intensity and size of the dent. Lighter dents spread on large areas give the best results, while deep impressions within a small area are a bit tricky to repair in the first go. Depending on the size and depth of the ding or dent, you will need to repeat the dry ice dent removal process until you are left with only traces of it.
2. Collect the Tools
This process is quite easy and all you need for this are some household tools. They include dry ice, protective gloves (to prevent any hazards related that the cold from the ice may cause), aluminum sheet and a hair dryer to warm the paint. These items are easily available at any store or mart, so you don't have to go through a hassle to buy them.
3. Soften the Panel
Blow the damaged area with a hair dryer for a couple of minutes or until the paint gets warm. Make sure the dryer is not too close to the surface of the car panel in order to prevent it from getting overheated or damaged further.
4. Cool it down
Now wear the thick protective rubber gloves and apply dry ice on the affected area, with the main focus on the center of the indentation. As you apply and move the dry ice rapidly on the damaged surface, the sudden drop in temperature from hot to cold will force the dent to come out and the panel will be leveled.
This process is one method of Paintless Dent Removal or PDR which is gaining immense popularity over the regular body shop repairs because it is eco-friendly, chemical free and cost effective. The dent removal method is perfect for minor dings in a vehicle as it is easy to do yourself without spending a fortune. However, it is important to note that this process needs to be repeated several times in order to ensure that the dent or ding completely disappears and you have a spotless car to drive.
No comments:
Post a Comment